# Vaporesso Xros Mini 3 vs Xros 3: Which Pod Kit Is Right for You? **By The No1 Plug** · 2026-10-21 The Vaporesso XROS range is one of the most popular pod kit families in the UK, and the XROS Mini 3 and XROS 3 are two of its best-known members. They share a name, a 1000mAh battery, a 2ml pod and a pod system that works with the wider XROS range, so it is easy to assume they are basically the same device in two sizes. They are not. The differences in activation, airflow, pod resistance and how you fill the pod change how each one feels day to day, and they decide which one suits you. This guide compares the two side by side using the specifications on our own product listings, explains what each spec means in plain English, and helps you choose without wasting money on the wrong kit. ## Table of Contents - [Quick Verdict](#verdict) - [Specifications Side by Side](#specs) - [Design, Size and Portability](#design) - [Battery Life and Charging](#battery) - [Pods, Coils and Resistance Explained](#pods) - [Airflow and Draw Style: MTL vs RDL](#airflow) - [Activation: Draw-Only vs Draw and Button](#activation) - [Filling the Pod and Avoiding Leaks](#filling) - [Choosing E-Liquid and Nicotine Strength](#eliquid) - [Running Costs and Replacement Pods](#costs) - [Looking After Your Kit](#care) - [Setting Up Your First XROS Kit](#beginners) - [Flavour and Vapour Production](#flavour) - [Refillable Pod Kits vs Disposable-Style Vapes](#vs-disposables) - [Accessories and Extras](#accessories) - [Troubleshooting in More Detail](#troubleshooting) - [Safety and UK Rules](#safety) - [Common Myths About Pod Kits](#myths) - [Which Should You Buy?](#which) - [Looking for Something Newer?](#newer) - [Final Thoughts](#final-thoughts) - [FAQ](#faq) ## Quick Verdict If you want the simplest possible vape, with no buttons and a compact body you can forget about in your pocket, the [Vaporesso XROS Mini 3](https://theno1plug.co.uk/products/vaporesso-xros-mini-3-pod-kit) is the better fit. If you want more control, meaning adjustable airflow, the choice of firing by button or by inhaling, and a lower resistance pod option for a warmer, fuller draw, the [Vaporesso XROS 3](https://theno1plug.co.uk/products/vaporesso-xros-3-pod-kit) gives you more to work with. Both are currently listed at the same price, so the decision comes down to how much you want to adjust versus how little you want to think about it. If you want... Choose The simplest, no-fuss setup XROS Mini 3 Adjustable airflow XROS 3 Button or inhale activation XROS 3 A lower resistance pod (0.6Ω) for a fuller draw XROS 3 The most compact, pocket-friendly design XROS Mini 3 A tighter, cooler draw closer to a cigarette XROS Mini 3 (1.0Ω / 1.2Ω pods) ## Specifications Side by Side These figures come from the specifications shown on our product pages. Vaporesso sometimes updates pod options and revisions, so always check the live listing for the latest details before you order. Specification Vaporesso XROS Mini 3 Vaporesso XROS 3 Battery 1000mAh built-in 1000mAh built-in Pod capacity 2ml refillable 2ml refillable Coil Integrated mesh coil Built-in mesh coil with COREX heating technology Pod resistance 1.0Ω / 1.2Ω (model dependent) 0.6Ω / 1.0Ω Activation Draw-activated Draw or button activated Airflow Adjustable or fixed, depending on pod Adjustable airflow control Filling method Bottom / side fill Top fill (clamshell) Charging USB-C fast charging USB-C fast charging Body Aluminium alloy Aluminium alloy Intended use MTL / RDL MTL / RDL Pod compatibility Vaporesso XROS pods Vaporesso XROS pods Compliance TPD compliant TPD compliant Price at time of writing £17.99 £17.99 ## Design, Size and Portability ### XROS Mini 3 The Mini 3 is positioned as the compact, ergonomic option, and our listing describes it as pocket-friendly. With a simple body and no button to catch on keys or coins, it is the kit most people will find easiest to carry all day. If your vape lives in a jacket pocket or a small bag and you value a slim profile above everything else, this is where the Mini 3 earns its name. ### XROS 3 The XROS 3 keeps the same family look, with a premium aluminium alloy body, but adds the controls that give it extra flexibility: a firing button and an adjustable airflow control. These features mean there is slightly more going on with the design, which most people will not notice in daily use, but it does mean you have a device you can tune rather than just pick up and puff. ### Build and colours Both kits use an aluminium alloy body, which feels more solid than a plastic shell and tends to cope better with everyday knocks. Both are offered in a wide range of colours, so you can match a device to your style. Colour availability changes, so check the live product page to see what is in stock. ## Battery Life and Charging On paper this is a draw. Both kits have a 1000mAh built-in battery and both charge over USB-C with fast charging support, so a single charge should comfortably cover a normal day for most vapers, and you can use the same cable you already use for your phone or other devices. That said, the 1000mAh figure is only half the story, because how long a charge lasts also depends on how you vape. A lower resistance pod such as the 0.6Ω option available on the XROS 3 produces more vapour per puff and uses more power to do it, so if you choose that pod you may charge more often than someone on a 1.0Ω or 1.2Ω pod. Heavier use, longer puffs and chain vaping will also shorten the time between charges. ### Simple charging habits that help - Top the battery up before it is completely flat rather than waiting for it to die. - Use a reputable USB-C cable and charger, and avoid leaving any device charging unattended overnight. - Keep the device away from extreme heat or cold, which can affect battery performance. - If you want a spare charger or cable, browse our [USB to Type-C charger](https://theno1plug.co.uk/products/type-c-charger). ## Pods, Coils and Resistance Explained Pod resistance is the single biggest difference between these two kits, and it is the spec most beginners find confusing, so here it is in plain English. ### What resistance (Ω) means Resistance is measured in ohms (Ω) and describes how much the coil resists the flow of electricity. In practical terms, a lower resistance coil heats up faster and produces more vapour, with a warmer, fuller feel and a looser draw. A higher resistance coil produces less vapour, a cooler and tighter draw, and tends to use e-liquid more slowly. Neither is better; they suit different styles. ### XROS Mini 3 pods: 1.0Ω and 1.2Ω The Mini 3 pods sit at the higher resistance end, which points toward a tighter, more discreet draw that is closer to drawing on a cigarette. This is generally the preferred style for people switching from smoking and for anyone using nic salt e-liquid, because it delivers a satisfying hit without producing large clouds. ### XROS 3 pods: 0.6Ω and 1.0Ω The XROS 3 gives you a choice. The 1.0Ω pod behaves much like the Mini 3 option, while the 0.6Ω pod opens the door to a looser, warmer draw with more vapour. That is the main reason to pick the XROS 3 if you like to experiment, or if you find a very tight draw restrictive. The 0.6Ω pod is also the better match for a slightly more relaxed, restricted direct-to-lung style, which the kit lists under RDL use. ### COREX heating technology The XROS 3 listing highlights Vaporesso's COREX heating technology and a built-in mesh coil. Mesh coils spread heat across a larger surface than a traditional round wire coil, which is generally associated with more even heating and cleaner flavour. Both kits use mesh coils, but the XROS 3 is the one that carries the COREX branding in its specification. ### Pods are shared across the XROS range Both devices are listed as compatible with Vaporesso XROS pods, so you are not locked into one device for life. When your pod needs replacing, you can pick up [XROS replacement mesh pods in a pack of 4](https://theno1plug.co.uk/products/vaporesso-xros-replacement-pods-2pack) or save more with the [pack of 10](https://theno1plug.co.uk/products/vaporesso-xros-replacement-mesh-pods-pack-of-10). Always check the resistance on the pack matches the style you want, because the available resistance options differ between the two kits. ## Airflow and Draw Style: MTL vs RDL ### What MTL and RDL mean Mouth-to-lung (MTL) means drawing the vapour into your mouth first, then inhaling, just as you would with a cigarette. It uses a tighter airflow and a smaller amount of vapour. Restricted direct-to-lung (RDL) means inhaling straight into your lungs, but with a more restricted airflow than a full sub-ohm setup, so it feels looser than MTL while still staying discreet. Both kits are listed for MTL and RDL use. ### Adjustable airflow on the XROS 3 The XROS 3 gives you an adjustable airflow control, so you can tighten the draw for an MTL feel or open it up for something looser. This is a genuine advantage if you are still working out what you like, or if you share a device with someone else who prefers a different draw. It also means you can change the feel of your vape depending on the time of day or the e-liquid you are using. ### Airflow on the XROS Mini 3 The Mini 3 listing describes airflow as adjustable or fixed depending on the pod, which means the draw you get is more closely tied to the pod you choose than to a control on the device. In practice this keeps things simple: you pick a pod, you get a consistent draw, and there is nothing to adjust or accidentally knock out of position. ### Which draw suits which vaper - **Tight and cigarette-like:** the Mini 3, or the XROS 3 with a 1.0Ω pod and the airflow closed down. - **Slightly looser and warmer:** the XROS 3 with a 0.6Ω pod and the airflow opened up. - **Not sure yet:** the XROS 3, because adjustable airflow lets you find your preference without buying another device. ## Activation: Draw-Only vs Draw and Button The Mini 3 is draw-activated, which means it fires the moment you inhale, with no button to press. That is the most intuitive way to vape, and it is the reason many beginners and ex-smokers find it so easy to pick up. There is also no risk of accidentally firing the device in a pocket, because there is no button to press. The XROS 3 offers dual activation: you can inhale to fire it or press the button. This flexibility is useful in a few situations. If you want to prime a fresh pod, test the device, or fire it without inhaling, the button makes that easy. Some vapers also simply prefer the positive click of a button to the more passive feel of draw-activation. ## Filling the Pod and Avoiding Leaks ### Top fill on the XROS 3 The XROS 3 uses a top-fill clamshell design. You open the top, drip e-liquid into the filling port, and close it again. This is the style most vapers are used to, and it makes it easy to see what you are doing and avoid overfilling. ### Bottom or side fill on the XROS Mini 3 The Mini 3 is listed with a bottom or side fill method, which is a slightly different approach that some vapers find tidier because the fill port is out of the way. If you have not filled a pod like this before, take your time and check the instructions that come with your pod the first time. ### Practical tips for any XROS pod - Fill slowly, and stop just below the top rather than squeezing in every last drop, to reduce the chance of leaking. - Always wait a few minutes after filling a fresh pod so the e-liquid can soak into the coil before your first puff. Vaping a dry coil is the quickest way to ruin a new pod. - Do not overfill, and never exceed the 2ml capacity. - Store your device upright where possible, and wipe away any liquid around the mouthpiece or fill port. - If the pod is leaking or gurgling, check that it is seated firmly and that the airflow is not blocked. ## Choosing E-Liquid and Nicotine Strength Both kits are designed for refillable use with standard bottled e-liquid, which gives you a huge choice of flavours. Which liquid suits which kit mostly comes down to the pod resistance you pick. ### Nic salts for higher-resistance pods Higher resistance pods, including the 1.0Ω and 1.2Ω options, pair well with nic salt e-liquid. Nic salts feel smoother at higher strengths and are built for low-power pod kits, so they are the usual choice for anyone switching from cigarettes. Browse the full [nic salts collection](https://theno1plug.co.uk/collections/nic-salts) to see what is available. ### Freebase for lower-resistance pods The 0.6Ω pod produces more vapour per puff, so lower nicotine strengths in a freebase, 50/50 e-liquid are often more comfortable than a high-strength nic salt, which can feel harsh with a looser draw. Our [10ml e-liquids](https://theno1plug.co.uk/collections/10ml-e-liquids) are a good place to start. ### Picking a strength As a general rule, light smokers tend to start around 10mg in a nic salt, while heavier smokers often start at 20mg, which is the maximum legal strength in the UK. If you are not sure, start lower and adjust, because you can always step up. If you have never smoked, a very low strength or even nicotine-free liquid is the sensible choice. ## Running Costs and Replacement Pods The upfront cost is identical, since both kits are currently priced at £17.99, so the real difference in cost comes from how you use them over time. - **Pods:** the pod is the main consumable, and it contains the coil. How quickly you go through pods depends on your e-liquid, how often you vape, and how well you look after the coil. Buying in multipacks is the easiest way to bring the cost per pod down. - **E-liquid:** a lower resistance pod uses e-liquid faster, so it can cost slightly more to run than a higher resistance one. - **Charging:** electricity cost is negligible, but a more power-hungry pod will need charging more often. If you buy in bulk or run a shop, our [XROS 3 box of 10](https://theno1plug.co.uk/products/vaporesso-xros-3-pod-kit-pack-of-10) is available at wholesale quantities, and you can browse the wider [wholesale collection](https://theno1plug.co.uk/collections/wholesale) for more. ## Looking After Your Kit A pod kit does not need much maintenance, but a few habits make a real difference to flavour and lifespan. 1. **Replace the pod when flavour fades or tastes burnt.** That is the clearest sign the coil has reached the end of its life. 2. **Do not chain vape.** Giving the coil a few seconds to recover between puffs helps it last longer and tastes better. 3. **Keep the contacts clean.** Gently wipe the connection between the pod and the battery with a dry cloth or cotton bud if you notice any residue. 4. **Use thinner e-liquid.** Pod kits like these work best with 50/50 or similar e-liquids, and very thick high-VG liquids can clog the coil. 5. **Charge safely.** Use a suitable charger and never leave a charging device unattended. ### Common problems and quick fixes - **Burnt taste:** usually a dry or worn-out coil. Make sure the pod has had time to soak, and replace it if the taste persists. - **Weak vapour or flavour:** check the pod has enough liquid and that the coil is not worn. - **Leaking:** check the pod is seated properly, that you have not overfilled, and wipe away any excess liquid. - **Device will not fire:** check the battery and the pod connection, and make sure the pod is properly inserted. ## Setting Up Your First XROS Kit: A Step-by-Step Walkthrough If this is your first refillable pod kit, the setup process can look more complicated than it really is. Both the XROS Mini 3 and the XROS 3 are designed to be straightforward, and once you have done it once or twice it takes under two minutes. Here is the process from unboxing to first puff. ### Step 1: Check what is in the box Open the box and make sure you have the device, a pod, a USB-C charging cable and the paperwork. Keep the paperwork, because it includes the safety information and the warnings required for nicotine products in the UK. Do not throw the packaging away until you have confirmed everything works, in case you need to return anything. ### Step 2: Charge the battery first Plug the device into a USB-C charger and give it a top-up before you use it for the first time. Even if the kit arrives with some charge, starting with a full battery means you can vape without interruptions and it helps you get a feel for how long a charge lasts for you. Never leave any rechargeable device charging unattended, and unplug it once it is full. ### Step 3: Fill the pod Choose an e-liquid that suits the pod resistance, as covered above. Open the fill port, hold the bottle upright and fill slowly, stopping a little below the top. Close the port firmly. Overfilling is the number one cause of leaks and gurgling in small pods, so err on the side of slightly less. ### Step 4: Let the coil soak This is the step most beginners skip, and it is the reason many new pods taste burnt. After filling, wait at least five minutes before your first puff. The cotton around the mesh coil needs time to absorb the e-liquid. Firing a dry coil damages it permanently and gives you an unpleasant taste that does not go away. ### Step 5: Take the first few puffs gently Start with short, gentle puffs rather than long, hard draws. This lets the coil wick properly and lets you judge how the flavour and throat hit feel. On the Mini 3 you simply inhale. On the XROS 3 you can either inhale or press the button, so try both and see which you prefer. ### Step 6: Adjust to taste If you are using the XROS 3, now is the time to experiment with the airflow control. Try a tighter setting for a cigarette-like draw and a more open setting for a looser pull. If the draw feels too airy or the throat hit feels weak, close the airflow down a little or consider a higher nicotine strength. If it feels too harsh, open the airflow or drop the strength. ## Flavour and Vapour Production: What to Expect Because both kits use mesh coils and share the same pod platform, the difference in flavour between them is smaller than the difference in how much vapour they make. Mesh coils are popular because the larger heating surface tends to produce even heating, which usually translates into consistent, clean flavour across the life of the pod. ### Flavour with higher-resistance pods The 1.0Ω and 1.2Ω pods heat more gently, which tends to suit sweet, fruity and ice flavours well and keeps the vapour cool. Because less e-liquid is vaporised per puff, flavour is concentrated rather than diluted. This is why higher-resistance pods are such a popular choice for nic salt e-liquids in fruit, menthol and dessert profiles. ### Flavour with the 0.6Ω pod The 0.6Ω pod on the XROS 3 runs warmer and vaporises more liquid per puff. Many vapers feel this gives a rounder, more intense flavour with more vapour, particularly with sweeter and creamier profiles. The trade-off is that you will use e-liquid faster and may notice the pod warms up if you take long, back-to-back puffs. ### Matching flavour type to pod Flavour Style Pod That Suits It Why Menthol and mint 1.0Ω / 1.2Ω Cool, crisp vapour keeps the cooling sensation sharp Fruit and ice 1.0Ω / 1.2Ω Concentrated flavour, smooth hit with nic salts Desserts and custards 0.6Ω (XROS 3) Warmer vapour suits richer, creamier profiles Tobacco 1.0Ω (either kit) Tighter draw feels closer to a cigarette Fizzy and sweets Either Depends on how much vapour you like Treat this as a starting point. Taste is personal, and the best way to find out what you like is to try a couple of flavours and a couple of strengths. ## Refillable Pod Kits vs Disposable-Style Vapes Many people arrive at the XROS range after using prefilled devices, so it is worth being clear about how a refillable kit differs in daily life. Disposable vapes have been banned for sale in the UK since June 2025, and the market has since moved toward prefilled pod devices and refillable kits like these. ### Cost over time A refillable kit has a small upfront cost, then you spend on e-liquid and the occasional replacement pod. For regular vapers this is usually cheaper per week than buying prefilled devices repeatedly, though the exact saving depends on how much you vape and which e-liquid you buy. ### Flavour choice Refillable kits give you the whole e-liquid market to choose from. If you get bored of a flavour, you change the bottle rather than the device. That freedom is one of the biggest reasons people stay with refillable kits. ### Convenience Prefilled devices win on pure convenience, since there is nothing to fill. A refillable kit asks a little more of you: you need to keep a bottle of e-liquid and occasionally wipe the device down. For most people, a couple of minutes a day is a fair trade for the savings and variety. If you want to compare formats in more depth, read our guide to [refillable pod kits versus prefilled devices](https://theno1plug.co.uk/collections/pod-kits). ### Environmental impact A device you refill and recharge for months creates far less waste than one you throw away every few days. Remember that vapes contain batteries and should never go in household bins. Take used devices and spent pods to a proper recycling point, and many retailers also accept returns. ## Accessories and Extras Worth Buying You do not need much beyond the kit itself, but a few inexpensive extras make life easier. - **Spare pods:** keep at least one spare so a worn-out coil never leaves you without a working vape. The [XROS replacement pods](https://theno1plug.co.uk/products/vaporesso-xros-replacement-pods-2pack) are the easiest place to start, and larger packs lower the cost per pod. - **A second charger:** one for home and one for your bag or car means you are never caught short. A [Type-C charger](https://theno1plug.co.uk/products/type-c-charger) works with both kits. - **Two e-liquids:** having a second flavour to rotate with keeps vaping interesting and stops flavour fatigue. - **A small cloth or tissue:** wiping the mouthpiece and fill port keeps the device clean and prevents sticky residue building up. - **A pouch or case:** protects the device from keys and coins in a pocket or bag. ## Troubleshooting in More Detail Most issues with pod kits come down to a handful of causes. Working through them in order will solve nearly every problem without needing to replace anything. ### The device does not fire First check the battery. A flat battery is the most common reason. Then remove the pod and reseat it firmly so the connection is clean. Wipe the contacts if there is any residue. On the XROS 3, try pressing the button as well as inhaling, to rule out a draw sensor issue. If it still does not fire with a charged battery and a properly fitted pod, contact the retailer you bought it from. ### The vapour tastes burnt A burnt taste almost always means the coil is dry or worn. Check that the pod has liquid and that you waited after filling. Avoid chain vaping, which gives the cotton no time to rewick. If you have been using the pod for a long time, flavours with a lot of sweetener tend to build up residue on the coil and shorten its life, so swap in a fresh pod. ### Gurgling or spitting This points to excess e-liquid in the airflow path. Remove the pod, gently blow through the mouthpiece or tap it against a tissue to clear the liquid, and refit it. Next time, fill slightly less. ### Leaking from the pod Leaks usually come from overfilling, a pod that is not seated fully, or pressure changes. Wipe everything clean, refit the pod and avoid squeezing the pod when filling. Storing the device upright helps. Changes in air pressure, such as on a flight, can also push liquid out, so keep the device upright and ideally empty the pod before travelling. ### Weak flavour on a new pod Give the pod a few more minutes to soak, take gentler puffs, and check the airflow setting on the XROS 3. If the flavour is weak even then, the e-liquid itself may not suit the pod. Thicker, high-VG liquids can wick poorly in small mesh pods. ### Short battery life If a charge is lasting less time than it used to, check which pod you are using, as lower resistance pods draw more power. Also consider whether your vaping habits have changed. If the battery drains very fast on a brand new device, contact your retailer. ## Safety and UK Rules You Should Know Nicotine is addictive, and vapes should only be used by adults who smoke or who already use nicotine. In the UK it is illegal to sell nicotine vaping products to anyone under 18, and The No1 Plug only sells to adults. Both the XROS Mini 3 and the XROS 3 are listed as TPD compliant, which means the pod size, bottle sizes and maximum nicotine strength of 20mg/ml follow UK requirements. - Keep devices and e-liquid out of reach of children and pets. - Use only the supplied or a suitable USB-C cable and a reputable charger. - Do not use a device that is damaged, swollen, or unusually hot. - Do not carry loose batteries or devices alongside keys and coins. - Check the packaging for the required health warning, and read the instruction leaflet. If you smoke and want to stop, free local stop smoking services in the UK can provide support alongside vaping. Vaping is not risk-free, and it is not recommended for people who do not currently smoke. ## Common Myths About Pod Kits ### "A bigger battery always lasts longer" Battery capacity matters, but pod resistance, puff length and how often you vape matter just as much. Two devices with the same 1000mAh battery can last very different times depending on how they are used. ### "Lower resistance is always better" Lower resistance means more vapour and a warmer draw, not better quality. Many people find a higher resistance pod more satisfying, particularly with nic salts and when switching from cigarettes. ### "You can put any e-liquid in any pod" You physically can, but results vary. Small mesh pods work best with thinner, 50/50 style liquids. Very thick liquids and very high nicotine strengths in a low-resistance pod are the most common causes of disappointing results. ### "Adjustable airflow is only for experts" The opposite is true. Adjustable airflow is most useful when you are still finding your preferred draw, because you can change it without buying anything new. ### "Bigger is always better" The Mini 3's compact size is not a downgrade. For many people, a smaller device they carry every day is far more useful than a more capable one left at home. ## Which Should You Buy? ### Buy the XROS Mini 3 if... - You want the simplest, most pocket-friendly device with nothing to adjust. - You are switching from cigarettes and want a tight, cigarette-style draw. - You plan to vape nic salts at a moderate to high strength. - You like draw-activation and do not need a button. ### Buy the XROS 3 if... - You want adjustable airflow so you can fine-tune the draw. - You would like the option of a 0.6Ω pod for a warmer, fuller feel. - You prefer the choice of firing by button or by inhaling. - You are still working out your preferred style and want room to experiment. ### Can you use both? Because both kits take XROS pods, plenty of vapers keep one of each: the Mini 3 as an everyday carry and the XROS 3 for home. That gives you the best of both without buying into a completely different system. ## Looking for Something Newer? Vaporesso has continued to build on the XROS line. If you want to see what else is available, take a look at the [Vaporesso XROS 4 Pod Vape Kit](https://theno1plug.co.uk/products/vaporesso-xros-4-pod-vape-kit) and the [XROS 4 Mini](https://theno1plug.co.uk/products/vaporesso-xros-4-pod-vape-kit-1), or browse the full [Vaporesso pod kit collection](https://theno1plug.co.uk/collections/vaporesso-pod-kits). For a wider choice across brands, see our [pod kits](https://theno1plug.co.uk/collections/pod-kits) and [vape kits](https://theno1plug.co.uk/collections/vape-kits). ## Final Thoughts The XROS Mini 3 and XROS 3 are close relatives that suit different people. The Mini 3 is the simple, compact, draw-activated option, ideal if you want a vape that gets out of the way. The XROS 3 gives you adjustable airflow, button or draw firing and a lower resistance pod, ideal if you like to tune your setup. At the same price and with shared pods, you cannot make a bad choice, only a slightly better-matched one. If you are still undecided, think about the first week. Will you be happier with nothing to adjust, or with a few settings to explore? Answer that, and the decision makes itself. When you are ready, you can pick up the [XROS Mini 3](https://theno1plug.co.uk/products/vaporesso-xros-mini-3-pod-kit) or the [XROS 3](https://theno1plug.co.uk/products/vaporesso-xros-3-pod-kit), add a spare pack of pods and a nic salt or freebase e-liquid from our [10ml range](https://theno1plug.co.uk/collections/10ml-e-liquids), and you are set. ## FAQ ### What is the difference between the XROS Mini 3 and the XROS 3? Both have a 1000mAh battery, a 2ml pod, USB-C charging and mesh coils. The main differences are that the XROS 3 has adjustable airflow, button or draw activation, top fill, and lower 0.6Ω / 1.0Ω pod options, while the Mini 3 is draw-activated only, uses 1.0Ω / 1.2Ω pods, and is the more compact option. ### Do the XROS Mini 3 and XROS 3 use the same pods? Both are listed as compatible with Vaporesso XROS pods, but the resistance options differ between the two kits. Always check the resistance on the pod pack before you buy to make sure it suits your device and your preferred draw. ### Which Vaporesso XROS is best for beginners? The XROS Mini 3 is the simplest, with draw activation and no controls to learn. The XROS 3 is also beginner-friendly and has the added benefit of adjustable airflow, which helps you find your preferred draw as you gain experience. ### Which one is better for nic salts? Higher resistance pods, such as the 1.0Ω and 1.2Ω options, pair best with nic salts, and those are available on the Mini 3. The XROS 3 can also use a 1.0Ω pod with nic salts, while its 0.6Ω pod generally suits lower-strength freebase e-liquid. ### Which has the better battery life? They share the same 1000mAh battery, so battery capacity is identical. Real-world battery life depends on your pod resistance and how you vape, with lower resistance pods drawing more power. ### Is the XROS 3 refillable? Yes. Both kits use a 2ml refillable pod. The XROS 3 fills from the top, while the Mini 3 uses a bottom or side fill method. ### How often should I change the pod? There is no fixed schedule, because it depends on your e-liquid, how much you vape, and how you look after the coil. Replace the pod when the flavour fades, the vapour weakens, or the taste turns burnt. ### Can I use thick e-liquid in an XROS pod? It is best to stick with 50/50 or similarly balanced e-liquids. Very thick, high-VG liquids can wick slowly and clog a small mesh coil, which leads to weak flavour or a burnt taste. ### Are these kits TPD compliant? Yes. Both kits are listed as TPD compliant, with a 2ml pod capacity that meets UK requirements for refillable devices. ### Are there newer XROS models? Yes. Vaporesso also makes the XROS 4 and XROS 4 Mini, along with other models in the range. If you want to see what is currently available, browse the Vaporesso pod kit collection. * * * _Browse the full range of [Vaporesso pod kits](https://theno1plug.co.uk/collections/vaporesso-pod-kits) at [The No1 Plug](https://theno1plug.co.uk/), with free UK delivery on orders over £40._ **Tags:** best vaporesso pod kit for beginners, vaporesso pod kit uk, vaporesso xros mini 3 vs xros 3, which vaporesso xros is best, xros 3 review, xros 3 vs xros mini 3 difference, xros mini 3 review, xros pods compatibility --- > Source: [The No1 Plug](https://theno1plug.co.uk/blogs/news/vaporesso-xros-mini-3-vs-xros-3)